Feelthere EMB 145 throttle problem

[teofilo]

Hey guys!
Is anyone in this forum using the Feelthere Embraer 145?
I am having issues that when I load the aircraft in cold and dark settings the throttle goes crazy, starts moving forward and backwards
and alerts start to happen. Very strange behavior.
No other aircraft have the same problem as this one.

Any of you have seen this issues?
Thanks,

Teo

[alphaone]

Huh that's odd. I have the feelthere erj145 too and also use the cold and dark settings. It pings once right after it loads but after that its...
well cold and dark.

[Dutch64]

You have to make sure (as with lots of addon aircraft) that your default flight is the cesna. If not, load the cesna, engines off, avionics on, save
as default flight. Now try again starting up your erj. Also, is your joystick calibrated correctly?

[alphaone]

No you don't have to do that with the feelthere erj. It has a special setting that you set up before you start fs that loads the plane then turns
everything off really fast (you usually don't even notice, but you get one warning ping usually). It works for me, dunno what your problem is.

[Dutch64]

I know what you mean, more planes do have this cold and dark cockpit setup config tool and still then, if you get these problems, make sure your
default flight is the cesna with engines shut off and avionics on.

[eazy]

I also always load it directly (not via Cessna) and never had problems.
teofilo, what throttle input do you use (throttle quadrant, joystick, keyboard) ? Maybe the ERJ receives throttle signals where it should be
set to idle.

[Dutch64]

I didn't say you had to load the cesna first, just make sure that it is your default flight, that it has been saved as your default
flight.

[Dutch64]

Maybe let me say it like this, when you start up fs9 and you reach the page where you can choose your plane, which plane does it show in the turning
picture? It should show the cesna

[Dutch64]

I quickly checked there forum, there seems to be an issue with fsuipc and the throttle, did you check this out also?

http://www.iemit.com/forum/topic.asp?TOPIC_ID=3144
http://www.iemit.com/forum/topic.asp?TOPIC_ID=2424

It's not exactly what you describe but might be related. (But still i would check what your default flight is set at )