[FINAL VERSION?] New FSP utility - aircraft browser

[DanSteph]

e-mail sent

Dan

[Realm174]

Dan, here's the latest printscreen, with the most recent link in this thread...

[DanSteph]

Thanks realm, the "MEP" bug is now cleared but I didn't posted this version yet...
I'm working with nick to clear it's bug and will post the next version...

Dan

[DanSteph]

oki doki...seem the problem is solved for nick as well... (he sleep yet but I'm sure at 99%)

Here is the latest version wich must be free of the "c3" bug...
http://www.fspassengers.com/images/AircraftBrowser.zip

unzip in FsPassengers/bin and let me know if it's okay...

Many thanks for your help&testing...

Dan



Post Edited ( 08-06-05 03:11 )

[Capt. Wotan]

Good Morning chaps,

Unfortunately the Mooney bug still exists, i completly deleted and extracted the file from the link above into the \bin directory. After that the
Mooney still showed as MEP C3.

Thanks

[Swag]

That link seems to still point to the older 2nd version I think...

[DanSteph]

Swag wrote:
That link seems to still point to the older 2nd version I think...

Ah your right sorry, my mistake,I uploaded from wrong location... here is the latest
version wich should get ride of "C3"

http://www.fspassengers.com/images/AircraftBrowser.zip

Thanks for testing,

Dan

[Capt. Wotan]

I'm sorry my Mooney still shows as C3, even after deleting the new old one and installing the one from the above link.

[Realm174]

Updated screenshot...

[IanP]

Having just downloaded and tried the latest version, I have both the Mooney Bravo and Dreamfleet C177 listed as "C3".

However, I have found something odd about the C177 Cardinal:

[GeneralEngineData]
engine_type=0
Engine.0=-1.75, 0.00, 0.70
//Engine.0=-1.75, 0.40, 0.70 //Set Prop sliders to 1/2 or more
fuel_flow_scalar=1.00
min_throttle_limit=0.000000

I guess it's picking up that second engine line?

I'm using lbs and US$ at the moment, despite being a Brit (and hence with British Windows settings).

Does that help at all?

Cheers,

Ian P.

[DanSteph]

Gentlemen,


Just uploaded a new version... -I hope- this time the C3 is gone...
Also I took care of your remark Ian, "//" line must not be taken in account...
http://www.fspassengers.com/images/AircraftBrowser.zip

let me know how it goes....

Thaaaaaaaaaaaanks

Dan

[IanP]

My Mooney is still C3. - The listing entry is:

C3 | Mooney Bravo | MEP | 933kg | $992,913 | mooney_bravo

(Sorry, I can't do screenshots very easily). The Cardinals are now SEPs and C0 so that got sorted, thanks.

...So... Right... What's up with this Mooney?

Ian P sticks his head back into the aircraft.cfg to look for anything else that might help Dan...

Ian P.

[IanP]

Ten minutes later, Ian P returns doing a Snoopy Dance...

It's picking it up from somewhere within the [fltsim.x] description section - if I replace the descriptions with "Edited Out.", the Mooney becomes C0
and SEP.

A little more investigation says that it is picking up from the section that says "...powered by a Porsche engine. Although..."

If I replace this with "...powered by a Porsche enginex. Although..." then the aircraft lists as C0 and SEP. (I caused the same effect by putting a space between the word engine and the full stop.)

Does that help at all, or did you know that already?

Is it possible to only count when it says engine.[integer] and ignore engine.[space]?

Cheers,

Ian P.



Post Edited ( 08-06-05 21:03 )

[Capt. Wotan]

Yeah i altered the file, just like Ian P in fact, and it seems to work fine.

Thanks

[DanSteph]

Now this time if the mooney is still C3 I eat my hat

Try this with your mooney uncorrected:

http://www.fspassengers.com/images/AircraftBrowser.zip


Dan
"Were is the ketchup ? I need ketchup..."