Aliasing a default VC to any airplane

[timtomairways]

After re reading the origonal post. i think i see where people can get confused.

here the steps i followed to get my DVA B738 to work.

Aircraft: Default B737-800. And the DVA B737-800. Note the DVA B738 is the OSKY one, but its set up for use with Delta Virtual, and only avalible to
the members of that VA. but this should work all the same.

I recommend haveing 2 window explorer windows open. one for the default 737 and one for the POSKY one. It makes your life easier

1. In the Default window, Modle Folder. Copy the B737_800_interior.mdl file. Paste into the modle folder on the POSKY Window.
Note: the Panle sound and Soundai folders are not nessacery since they are alised to the default anyway save you a couple of MB of HD space and
dont copy them.

2. In the Default window, Texture folder. Cpoy all Files except the Thumbnail. Paste them into All texture folders of the POSKY window. (do it to
every single one, this can save you some headake.

3. in the default window, open the aircraft CFG and find the views section (it should be Right above radios, and right below Hydraulic_system).

copy it. this is what it should say
[Views]
eyepoint=43, -1.55, 1.9 //(feet) longitudinal, lateral, vertical distance from reference datum - Opensky Model
//eyepoint=38.70, -1.31, 3.7 // Default FS VC

Paste it into the views section of the POSKY CFG (its in the same spot as the default CFG. if its not there then you will have to add it. so just paste it)

4. This part is not nessacery but recommended.

in the default CFG copy Every thing from [CameraDefinition.0]
down to [CameraDefinition.004]

paste it into the POSKY CFG

thoues are preety easy to find. right below the [General] section of the CF, twords the top.

5. Last but not least. open the Modle folder of the POSKY aircraft

open the modle CFG wich should say this
[models]
normal=OSX738

in a line below the Normal=OSK738 add this
interior=B737_800_interior

it should look like this now

[models]
normal=OSX738
interior=B737_800_interior

And your done