Wilco 737-3/4/500 CTD

[Horatio]

Hi.
I`ve used the 737-300 from wilco in FSP, and it has worked perfectly!
Then yesterday i reinstalled 737-300 to install the update with the 400 and 500 also.
After this i had to configure the aircraft in FSP to fly it. Then i got CTD.
So i thought it was because i had flyed with it before in FSP, and that FSP was confused:P

So i sold the aircraft and bought it again, and tryed to config. it again. And i got CTD again.
Then i reinstalled FSP and 737-300/400 and -500 as well.
Still CTD. I`ve tryed with different liveries of the 737, but it result in CTD.
But the PMDG and other aircrafts works perfectly.

I hope someone can help me!

Thx!

Regards
Horatio

[runibl]

I had the same with the wilco 737.
:faq: http://www.fspassengers.com/?action=faq&question=67

Do it manually. Open up the Aircraft.cfg for each model -300, -400 & -500.
Find it the weight section. For me it looks like this by default:

max_number_of_stations=50
station_load.0="1000.0, 27.0, 0.0, 0.0, Pilots and Crew"
station_load.1="25000.0, 0.0, 0.0, 0.0, Pax - Baggage"

(The two "station_load" lines, may have different numbers for each model. Don't change the default lines.)

And add these lines so it will look like this

max_number_of_stations=50
station_load.0="1000.0, 27.0, 0.0, 0.0, Pilots and Crew"
station_load.1="25000.0, 0.0, 0.0, 0.0, Pax - Baggage"
station_load.2 = '0.0, 0.0, 0.0, 0.0, FsStation'
station_load.3 = '0.0, 0.0, 0.0, 0.0, FsStation'
station_load.4 = '0.0, 0.0, 0.0, 0.0, FsStation'
station_load.5 = '0.0, 0.0, 0.0, 0.0, FsStation'
station_load.6 = '0.0, 0.0, 0.0, 0.0, FsStation'

That should do it.

[Horatio]

Thanks you for answere.
I faild to inform that i got it fixed.
I bought the default livery for 737-X(wilco) with another airline!
Then i installed the liveries, and bought the livery i wanted with my airline.
Thank you anyway.

Regards
Horatio

[runibl]

Good to hear you got it working.