How to let FsPassengers detect my A2A C182 as A2A-Product?

[NoahDoah]

Hello,

I really love FsP but I have a problem.

There is that known "bug" with A2A Aircraft. It gets really heavy and when I land it just nosedives into the ground and crashes.

However, FsP is awesome and detects A2A-Aircraft and let the weight and fuel program in FsP deactivate to do this via the A2A refuel/load panel.

With my A2A-Cherokee this works perfectly. But my C182 by A2A is not recognized as A2A-product by FsP and I have to load it via the FsP-Program, what makes that bug arising again. Always nosediving into the ground after landing. I got degraded because of that

Would be nice if someone can come up with a solution. Because I love FsP and the C182.

[Joeflyer]

Are you using a good payload model for the A2A aircraft? Or, have you tried various payload models? I don't have any of the A2A aircraft and can't speak from experience regarding the proper use of it. I assume you can't manually set the A2A load configurator for the 182 to zero and allow FsP to load the aircraft? There may be a conflict going on where the aircraft is actually out of CG.

[NoahDoah]

I am using the default FsP Payload-Model for the C182. As I said: My other A2A-Aircraft are detected by FsP and I can load the aircraft with the integrated A2A Load-panel. Then there are no problems.

[Joeflyer]

Try a different payload model in the More Downloads section for the 182. It can't hurt.

[NoahDoah]

Try a different payload model in the More Downloads section for the 182. It can't hurt.

Ok, I will try that.