Fuel quantity issue (Beech King Air)

[Vokial]

Hi all!

I was flying the stock Beech King Air that comes with FS9 and it was configured (from the FS fuel page) to have full tanks, like on every flight of
mine, while on the FSP initial screen i configured to have around 70% of fuel (i don't remember precisely the quantity but it was less than full).
After reaching my cruise altitude (FL160) the fuel indicator began to fall, just like if there was a big leak in the tanks... i checked the FSP in
flight report and it showed me that i had around 800kg of fuel left... might it be a bug? I made a screenshot, in which you can see the in flight
report showing 780kg of remaining fuel and the fuel indicator of the KingAir showing empty tanks...

Direct link to the screenshot: (i wanted to show the thumbnail with direct link to the full sized image by clicking on it but it seems that this forum
doesn't support html coding)
http://img392.imageshack.us/my.php?image...mod1ua.jpg

I thought that the problem could be because of the different settings of the fuel screen in FS9 and the fuel boarded at the beginning of the FSP
flight, but even in that case, the King Air indicator should show more fuel than the one reported in the FSP report...

Did I make some mistake or (if it's a bug) how can i fix this issue?

[Yann Collas]

Hi Vokial,

In beech 350 fuel indicators are for all tanks it's the reason why you si indicator at 0 when remaining 800 kg.
When the active thank will no more have fuel the needle will goes to full as new full tank selected.
Don't worry ;-))

Yann

[Vokial]

I didn't know that, thank you!