Wrong destinations?

[fabrytnix]

I've seen tha in 3 airports PANC, VABB, WSSS, a bad detecting of airport.
I've landed at those airport but FSP said thet the airport was wrong
Something to edit tor correct this problem?
tnx
Fabrizio

[Galih Prasetya]

hmm. I flew to PANC several times, no problem so far...

[Enzo]

...make a search in the forum, this issue has been discussed several times just shortly... if I still remember there was also a member
having problems with PANC...

[fabrytnix]

Galih Prasetya wrote:
hmm. I flew to PANC several times, no problem so far...

hmmmmm ????
I've flown in PANC and i HAVE IT.
Be careful, my friend : before think people say bullshit
Fabrizio

[fabrytnix]

Enzo wrote:
...make a search in the forum, this issue has been discussed several times just shortly... if I still remember there was also a member
having problems with PANC...

Tnx Enzo
I've read something about helipad but I heaven't heliport (i think ) in these AFCAD2 files, anyway I'll search for PANC
Ciao
Fabrizio



Post Edited ( 03-20-06 10:24 )

[fabrytnix]

I'm quite sure that is a problem of AFCAD2 files, but is only a heliport problem?
There is not a definitive solution editing AFCA2 files?
Obiuvsly this problem occur in addon AFCAD2 files
Reguards
fabrizio

[Enzo]

1. are you using Traffic 2005?
2. what does it say at the final report at which airport you arrived instead of PANC?

[Enzo]

check out this:
http://www.fspassengers.com/forum/showth...#pid116789

Author: jon <-Msg 6 Posts Status: Young recruit Date 03-07-06 03:40

Thanks for the input. I did some messing around with my AFCAD and fixed the problem. Although, I'm not sure exactly how. I was using
a third party AFCAD file of PANC. No matter where I parked at PANC, FSP was saying I was at LHD (next door). I deleted the third-party
PANC and used FS9 default PANC - presto - problem solved. Now I can be where I really wanted to be when I get there. it's no wonder
my wife thinks I'm an idiot.

maybe write him a message!

Ciao

[jboweruk]

There is a possible reason for this, how many people who have this issue have JustFlight's Traffic2005 installed?

I have it sometimes and I've found that it's when I've landed at an airport and been told to park up.... On the Helipad, which for whatever
reason has a different ICAO code.

[fabrytnix]

Enzo wrote:
1. are you using Traffic 2005?

No I haven't

Enzo wrote:
2. what does it say at the final report at which airport you arrived instead of PANC?

Something like LHD I can't exactly remember now

Ciao
Fabrizio



Post Edited ( 03-20-06 15:57 )

[poden]

Hmmm, I recently flew into a small field with only a 3-letter symbol (L50). When I set the destination, I entered "L50 " (i.e. with a trailing space).
On arrival, I was penalized for not landing at the destination. I can't tell if its just because its a small field, or there's still an issue with
3-letter codes. Does anyone know if this issue (of 3-letter codes) ever got cleared up?

[Drew]

i belive i got the same LHD when i landed there...

LHD Lake Hood Airport Anchorage AK

[fabrytnix]

Drew wrote:
i belive i got the same LHD when i landed there...

LHD Lake Hood Airport Anchorage AK

Do you remember the runway?
Reguards
Fabrizio

[Ryanamur]

http://www.fspassengers.com/?action=faq&question=46

[Oisa]

Hallo to everyone,

I had the same problem at some eurpean airports. The problem was solved by searching for the airport FsP thought I landed using AFCAD and than
disabeling the scenery area. For me it was Traffic2005. It apearently added some AFD files (airport locations and parking spots) on top of other
airports. You can safely remove/disable these facilities, it only affects AI traffic.

Hope it helps
Andreas