Simflyers scenery

[dnieuwenhuis]

I have problems with the scenery of Simflyers.net. Yesterday I landed at LIRF and received a panelty for rolling beyond the edge of the
runway. I thougt ok'e, maybe was my rolling speed to high. But today I did a flight from LIRF to LIBD (both simflyers scenery) and I
received panelties for the take off and the landing. I know for sure that my take off was perfect, the landing was a little hard but I did not go
beyond the edge of the runways.

Any idae?

Diederik

Panelties:
At departure airport you rolled at 175 kt beyond the edge of the runway.The landing gear sustained some damage and our company has
received a fine of 1'434€. (-875)
At arrival airport you rolled at 126 kt beyond the edge of the runway without any emergency. The landing gear sustained some damage
and our company has received a fine of 1'033€. (-630)
You made a very hard landing at -619 ft/mn and the tires sustained damage. (-400)
You authorized food/drink to be served too late in the flight and it was interrupted by arrival procedures. (-50)

[nem]

Is the AFCAD for the scenery up to date?

[pagir]

The problem is simple:

What you see is not always what you get!

In other words, the scenery doesn't coordinate the visual with the terrain declaration. So you can "see" a landing strip but in fact the terrain is declared as grass or taxiway or..., but not as a landing strip... Fs9 (and the PAX!) can't see what you are seeing and think you are rolling off the runway. Generally, this problem occurs only with addon, since Microsoft (almost) always makes accurate declarations.


Five ways of correcting this:

1. Update the AFCAD. Maybe it was fixed but you don't have the update;
2. Ask Simflyers.net to correct this;
3. Try to fix it yourself (I would never be able to do so... but maybe you can )
4. Do not land at those airport (I know... bad idea... )
5. Change the penalty in the more_option.cfg this way (turn the "0" to "1":

DisableRollOutsideLandingStrip =1; // disable the roll or landing outside landing strip penalty

pagir



Post Edited ( 07-29-05 00:37 )

[Steve Mc Lean]

Hi,

He is missing the exclude file from the scenery that tells FS to ignore the original airport . He needs to check his: LIRF/scenery folder for
the exclude.bgl file to see if it is there. If missing, reload the scenery or if missing all together from the package, as Pagir said, contact
simflyer.

Bye!

Steve

[ebolaz]

Hiya, I have exactly the same problem with KPHX Sky Harbor (Simflyers).

Tx for the answer Pagir.



Post Edited ( 07-30-05 12:40 )