+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3)
+--- Forum: FsPassengers Support (http://www.fspassengers.com/forum/forumdisplay.php?fid=5)
+--- Thread: Service-on-board. Altitude problem (/showthread.php?tid=9244)
Service-on-board. Altitude problem - Maxim_Sweden - 16-06-2014
Hello. One day i downloaded CaptainSim 767 and wanted to fly on it with FSPassengers, but i have an altitude problem: I can't serve anything
on board before i reach 16 000 ft. Seems like that is not realistic. How can i change this altitude-limit? (Sorry for bad english, thank you)
Re: Service-on-board. Altitude problem - Joeflyer - 16-06-2014
That depends on the terrain you may be flying over. Is is mountainous terrain? That may be the problem if you are only a few thousand feet above the
highest terrain.
Re: Service-on-board. Altitude problem - gbapache - 17-06-2014
You must be above 4500 ft. AGL to serve anything to the cattle.
Re: Service-on-board. Altitude problem - Maxim_Sweden - 17-06-2014
Quote:Joeflyer wrote:
That depends on the terrain you may be flying over. Is is mountainous terrain? That may be the problem if you are only a few thousand feet
above the
highest terrain.
No. There were no any mountains.
Re: Service-on-board. Altitude problem - Maxim_Sweden - 17-06-2014
Quote:gbapache wrote:
You must be above 4500 ft. AGL to serve anything to the cattle.
I reqched this altitude, but it still said to me, that i can't serve anything.
Re: Service-on-board. Altitude problem - whiskey-zulu - 17-06-2014
Sounds to me that he has the transition altitude set to the default within the initial company settings. I don't think that once you've created the
company that you can edit the transition altitude that you chose in the initial settings, so unless you want to start a new company and edit the TA to
the one you use.
Re: Service-on-board. Altitude problem - Maxim_Sweden - 07-07-2014
Quote:whiskey-zulu wrote:
Sounds to me that he has the transition altitude set to the default within the initial company settings. I don't think that once you've created the
company that you can edit the transition altitude that you chose in the initial settings, so unless you want to start a new company and edit the
TA to
the one you use.
i just reinstalled FSP, and now it works after crossing 4500feet. Thank you for reply!