![]() |
Belly Landing and Realism Settings P3D - Printable Version +- FsPassengers Forums (http://www.fspassengers.com/forum) +-- Forum: FsPassengers (http://www.fspassengers.com/forum/forumdisplay.php?fid=3) +--- Forum: FsPassengers General (http://www.fspassengers.com/forum/forumdisplay.php?fid=4) +--- Thread: Belly Landing and Realism Settings P3D (/showthread.php?tid=17842) |
Belly Landing and Realism Settings P3D - Antonis SX-AKO - 31-08-2016 Hello everyone After 9 months without a flight I finally returned to P3D and flying (virtually) I decided to do a short international flight from LCLK to LGIR. During approach there was a problem with the gear. None of the landing gear had been extended and decided to do a go around to see if I find a solution. Nothing changed and decided to complete an emergency belly landing. I touched the ground with a -122 ft/minute and a speed of about 122 (good enough I believe for the A321). Right after touchdown P3D detected it as a crash and didnt let me to disembark passengers or continue the emergency. Is there any way to make P3D allow the belly landings and dont detect them as a crash? If not is there a way to to remove the belly landing emergency? (I dont prefer this solution) |