+- FsPassengers Forums (http://www.fspassengers.com/forum)
+-- Forum: Flight Simulators (http://www.fspassengers.com/forum/forumdisplay.php?fid=7)
+--- Forum: Prepar3D General (http://www.fspassengers.com/forum/forumdisplay.php?fid=8)
+--- Thread: [Work in Progress] FsPassengers for Prepar3D v4 (64 bits version) (/showthread.php?tid=18097)
RE: [official] information about Prepar3D v4 (64 bits version) - DanSteph - 25-05-2018
I play also guitar and make music when I have time, this is my home studio version of California dream...
http://orbiter.dansteph.com/hotel.mp3
The voice alone can be found here:
https://www.youtube.com/watch?v=I3eiDhBBOro
The guitars are synthetic, I didn't had a good mic/entry at this time
RE: [official] information about Prepar3D v4 (64 bits version) - tonaz - 25-05-2018
Hello Daniel,
I am a graphician, but also a music composer and sound designer.
Here you can download a zip file with some of my original songs.
https://drive.google.com/open?id=1z2_hf_ugUPPPPfyjG0hqHEvBHDHqTgAk
For the final ending i would suggest:
"Pour Elise" or "Junglebeat" or "Mirror's Edge" or "Synthetika"
Those may start "slow" but then they do start rock. I can edit them as your wish.
Let me know, bye
RE: [official] information about Prepar3D v4 (64 bits version) - Joeflyer - 25-05-2018
(25-05-2018, 12:00 AM)DanSteph Wrote: I play also guitar and make music when I have time, this is my home studio version of California dream...
http://orbiter.dansteph.com/hotel.mp3
The voice alone can be found here:
https://www.youtube.com/watch?v=I3eiDhBBOro
The guitars are synthetic, I didn't had a good mic/entry at this time
Awesome! Were your playing any part of the guitar on the mix?? Ive been learning Hotel California on a Taylor 314ce acoustic..finger style of course. What about Dust In The Wind by Kansas? Love that song and learned on the same acoustic. It was difficult for me but I did it...finally! At 55 it's hard to teach an old dog new tricks
Slightly off topic for sure
(25-05-2018, 12:26 AM)tonaz Wrote: Hello Daniel,
I am a graphician, but also a music composer and sound designer.
Here you can download a zip file with some of my original songs.
https://drive.google.com/open?id=1z2_hf_ugUPPPPfyjG0hqHEvBHDHqTgAk
For the final ending i would suggest:
"Pour Elise" or "Junglebeat" or "Mirror's Edge" or "Synthetika"
Those may start "slow" but then they do start rock. I can edit them as your wish.
Let me know, bye
Great job on those files sir!
RE: [official] information about Prepar3D v4 (64 bits version) - tonaz - 25-05-2018
I missed another good candidate:
"Overtake"
https://drive.google.com/open?id=1iXvXLUZg5ZfN4AqUJYv6vTeNWqIG3IG9
RE: [official] information about Prepar3D v4 (64 bits version) - Skyzo - 25-05-2018
(25-05-2018, 12:00 AM)DanSteph Wrote: Time for some replies...
First, please folks, when you quote my post, remove the image and keep only the quote you want...
(24-05-2018, 03:46 PM)Skyzo Wrote: I want report a bug in fspassengers who is present since the first version of fspassengers : When you select a free compagnie (dont buy AIRCRAFT to flight); when you export the data to a website, the cargo weigt is always 0; could you solve this bug in the futur version ?
You mean the "CargoWeight" field ?
It tried yet a correction (bug was probably due to a patch that passed the old database with int16 to int32)
You'll tell me at release or at beta test time.
I confirm : it's "CargoWeight" field. The value is always 0 when you export flight to the website.
It's only when you choose a "free compagny" (don't buy aircraft to flight).
No problem to test with beta version...or release... as you prefer.
On the other hand, if you want, i can help you to rebuild the PHP CODE to work with all new version of php.
RE: [official] information about Prepar3D v4 (64 bits version) - AllenBlack - 25-05-2018
(25-05-2018, 12:40 AM)Joeflyer Wrote:(25-05-2018, 12:00 AM)DanSteph Wrote: I play also guitar and make music when I have time, this is my home studio version of California dream...
http://orbiter.dansteph.com/hotel.mp3
The voice alone can be found here:
https://www.youtube.com/watch?v=I3eiDhBBOro
The guitars are synthetic, I didn't had a good mic/entry at this time
Awesome! Were your playing any part of the guitar on the mix?? Ive been learning Hotel California on a Taylor 314ce acoustic..finger style of course. What about Dust In The Wind by Kansas? Love that song and learned on the same acoustic. It was difficult for me but I did it...finally! At 55 it's hard to teach an old dog new tricks
Slightly off topic for sure
(25-05-2018, 12:26 AM)tonaz Wrote: Hello Daniel,
I am a graphician, but also a music composer and sound designer.
Here you can download a zip file with some of my original songs.
https://drive.google.com/open?id=1z2_hf_ugUPPPPfyjG0hqHEvBHDHqTgAk
For the final ending i would suggest:
"Pour Elise" or "Junglebeat" or "Mirror's Edge" or "Synthetika"
Those may start "slow" but then they do start rock. I can edit them as your wish.
Let me know, bye
Great job on those files sir!
Hilarious in a humorous way, I play guitar as well and can play rhythm of Hotel California and half of the guitar solo. Have been working on the song but haven't learned the intro yet....
RE: [official] information about Prepar3D v4 (64 bits version) - DanSteph - 25-05-2018
(25-05-2018, 12:40 AM)Joeflyer Wrote: Awesome! Were your playing any part of the guitar on the mix?? Ive been learning Hotel California on a Taylor 314ce acoustic..finger style of course.
I'm more into solo, I learned the major solo of HC, I didn't give a try to the picking part.
Another one that I was learning the last time I really played (some month ago
) was this one from Opeth Burden:https://youtu.be/5FVK1fCsEmE?t=243
Very impossible hard to do smoothly...
(25-05-2018, 12:40 AM)Joeflyer Wrote: Slightly off topic for sure
Naaaah... my two guitars
![[Image: 180525-231757_FastStoneEditor2.jpg]](http://www.dansteph.com/screenshots/180525-231757_FastStoneEditor2.jpg)
(25-05-2018, 12:26 AM)tonaz Wrote: I am a graphician, but also a music composer and sound designer.
Here you can download a zip file with some of my original songs.
https://drive.google.com/open?id=1z2_hf_ugUPPPPfyjG0hqHEvBHDHqTgAk
Awesome work Tonaz, very well done
but it's not really what I had in mind for a final music sorry.-----------------------------------
Mooooore neeeeews
-----------------------------------
While doing some flight test I thought it would be really cool to have also the heading in the Airport database so you can choose quickly a diverting airport and turn to it.
It's a great circle magnetic heading. You point your nose there and it's okay.
![[Image: 180525-230856_FastStoneEditor1.jpg]](http://www.dansteph.com/screenshots/180525-230856_FastStoneEditor1.jpg)
RE: [official] information about Prepar3D v4 (64 bits version) - DanSteph - 26-05-2018
-----------------------------------------------------
And more news again
-----------------------------------------------------
And here the final hyper-usefull-version of Airport Database....
It show now the Heading, the number of runway and the maximum runway length.
You have everything handy to choose an airport.
![[Image: 180526-074441_FastStoneEditor6.jpg]](http://www.dansteph.com/screenshots/180526-074441_FastStoneEditor6.jpg)
By default, FsPassengers will show runways informations but if you click on the link "Show Prices & Taxes" (see above)
you have the old display:
![[Image: 180526-074531_FastStoneEditor7.jpg]](http://www.dansteph.com/screenshots/180526-074531_FastStoneEditor7.jpg)
Of course you can go back by clicking on "Show runway information". This settings is remembered across Prepar3D launch.
Notice that Edwards AFB is the airport with the most runways in Prepar3D (in the world ?)
![[Image: 180526-074921_FastStoneEditor9.jpg]](http://www.dansteph.com/screenshots/180526-074921_FastStoneEditor9.jpg)
The airport detail show distance and heading with the appropriate help text (everyone is familiar with the "great circle magnetic heading" ?)
![[Image: 180526-081032_FastStoneEditor10.jpg]](http://www.dansteph.com/screenshots/180526-081032_FastStoneEditor10.jpg)
EDIT: While I was here, I added those information in "set destination", it took me 10mn:
![[Image: 180526-083307_FastStoneEditor11.jpg]](http://www.dansteph.com/screenshots/180526-083307_FastStoneEditor11.jpg)
RE: [official] information about Prepar3D v4 (64 bits version) - DanSteph - 26-05-2018
off topic
My family is making fun of my work
They offered me a ridiculous flying-cactus with an awkward eye contact...
![[Image: 180526-175416_FastStoneEditor1.jpg]](http://www.dansteph.com/screenshots/180526-175416_FastStoneEditor1.jpg)
Interesting geek fact: the screen behind is my "Artificial intelligence" named "florantine" which runs h24 on a fanless PC.
She controls many devices & sensors and can give numerous reports. I can talk to her to give orders and she reply with a nice voice.
The name "florantine" was chosen because it give almost no false positive when I call her. (And she doesn't understand my wife's voice
)
RE: [official] information about Prepar3D v4 (64 bits version) - sirius0912 - 26-05-2018
Hi Daniel, I am Varick. Good to see the great work you have done for the new version.
I really appreciate the works you have done for FSP. And it totally worths what you are offering! However, I am a student with loan and tuition fee to pay so that I have limited money to spend on this hobby. It will be a great help for me to afford my hobby as an aviation lover.
Actually, I sent you an email about a rebate request for about a month ago, I know you are quite busy that maybe you overlooked it. So I just re-sent it once again for you to check out easier. Reply me if you are free and Have a good day!
RE: [official] information about Prepar3D v4 (64 bits version) - Tessel - 26-05-2018
Ehmmmm
Im only a DJ..
Does that counts 2 ?
http://thegoldenclassics.nl
RE: [official] information about Prepar3D v4 (64 bits version) - DanSteph - 27-05-2018
(26-05-2018, 06:24 PM)sirius0912 Wrote: I know you are quite busy that maybe you overlooked it. So I just re-sent it once again for you to check out easier. Reply me if you are free and Have a good day!
Dear Varick , I replied in your thread here:
http://www.fspassengers.com/forum/showthread.php?tid=18305&pid=165656#pid165656
RE: [official] information about Prepar3D v4 (64 bits version) - tonaz - 28-05-2018
(25-05-2018, 10:20 PM)DanSteph Wrote: Awesome work Tonaz, very well done
Ok, no problem!
bytheway i would give them for free (or maybe for just a copy of FSPv4? :-D )
RE: [official] information about Prepar3D v4 (64 bits version) - DanSteph - 29-05-2018
Thanks you sir, I think I did find a music.
Don^t forget to apply for the beta when time come
RE: [official] information about Prepar3D v4 (64 bits version) - twingray - 29-05-2018
(29-05-2018, 10:09 AM)DanSteph Wrote: Thanks you sir, I think I did find a music.
Don^t forget to apply for the beta when time come
Where can I apply for the beta when it arrives?